Wirewrap

From OpenCircuits
Revision as of 10:06, 1 February 2008 by Russ hensel (talk | contribs) (revert spam)
Jump to navigation Jump to search

Wire-wrapping is a method of wiring through-hole components together on a board. It is usually used only for prototyping.

A manual wire-wrap tool is cylindrical with one large on-axis hole (for the pin to be connected) and an off-axis hole (for the wire - usually 30 gauge). Rotating this tool leaves a tightly-wound helix of wire on the pin. There are also powered tools with motors that work the same way.

Wirewrap is one of several circuit construction techniques.