Programming Languages

From OpenCircuits
Revision as of 08:36, 28 March 2008 by Mzoran (talk | contribs) (Make programming languages a separate page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Programming Languages

Very high level languages are less suitable for microcontrollers, so the choices are less then one would find on a PC. The main programming languages used in microcontrollers are Basic, C, and assembly. Microcontrolers are generally harder to program then PCs because it isn't as easy to view debugging output, it takes more time to flash a new firmware, and the tools are generally less developed then PC tools. One suggestion is to learn basic programming on a PC first and then migrate to embedded systems after gaining some understanding.


Some people consider this to be the easiest programming language to learn. The language is line oriented so compilers tend to produce more debugable error messages. Basic can either be interperated as in the Basic Stamp from Parallax or compiled as in PicBasic.


C is a middle level language that is considered to be high enough for productivity but close enough to the hardware to have some of the power of assembly. C has free form formating rules so the look of C varies according to style and C compilers tend to produce harder to debug error messages. C is gaining in popularity in microcontrollers as embedded systems are becomming more and more complex. C is almost always compiled instead of interperated. Advanced C requires understanding of pointers which requires lower level understanding of the hardware then some people are interested in going. Several free or demo versions of compilers such as variations of GCC for microcontrollers or C18/C30 for Microchip PIC processors are available.


Assembly is a near exact mapping to the actual instructions executed by processors. It is very processor specific. Some architecture such as the older PIC processors are optimized for assembly programming where some RISC based architectors are optimized for higher level languages. Some C compilers do not produce the best possible code so writing in assembly can theoritically produce faster code, but poorly written hand assembly can be worse. Some people mix C and assembly in the same project and most compilers make it easy to integrate assembly in C programs.