Editing PCB Manufacturers
Jump to navigation
Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 3: | Line 3: | ||
: ''This page lists "board houses" that take your custom PCB layout file and convert it to a custom printed circuit board (PCB) (ready for the next step: "assembly" adding parts). For "standard" prototyping PCBs, see [[stripboard]] and other [[techniques]].'' | : ''This page lists "board houses" that take your custom PCB layout file and convert it to a custom printed circuit board (PCB) (ready for the next step: "assembly" adding parts). For "standard" prototyping PCBs, see [[stripboard]] and other [[techniques]].'' | ||
− | + | ''(FIXME: briefly mention the most relevant "capabilities": "preferred" and "minimum" trace width / spacing / via hole size / via pad diameter.'' | |
− | |||
− | |||
− | |||
− | |||
− | ''(FIXME: briefly mention the most relevant "capabilities": "preferred" and "minimum" trace width / spacing / via hole size / via pad diameter.'' | ||
''Link directly to the manufacturer's "capability page" so readers can confirm these numbers for themselves.'' | ''Link directly to the manufacturer's "capability page" so readers can confirm these numbers for themselves.'' | ||
''Boards that push the limit of manufacturability cost more than robustly designed boards that use preferred sizes.) For more details, see [[Submitting PCB's for fabrication]].)'' | ''Boards that push the limit of manufacturability cost more than robustly designed boards that use preferred sizes.) For more details, see [[Submitting PCB's for fabrication]].)'' | ||
− | + | === homebrew fabrication === | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | === | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
[http://www.instructables.com/id/Make-hobbyist-PCBs-with-professional-CAD-tools-by-/ capabilities]: (see also [[Techniques#Homebrew fabrication]]) | [http://www.instructables.com/id/Make-hobbyist-PCBs-with-professional-CAD-tools-by-/ capabilities]: (see also [[Techniques#Homebrew fabrication]]) | ||
Line 86: | Line 20: | ||
* minimum via: 0.031" (0.8mm) diameter, 0.024" (0.6mm) ring giving 0.080" (2 mm) outer diameter. | * minimum via: 0.031" (0.8mm) diameter, 0.024" (0.6mm) ring giving 0.080" (2 mm) outer diameter. | ||
− | + | === [http://www.ultimatepcb.com/ UltimatePCB] === | |
− | [http://www. | + | Best prices around for >2 layer boards. 4-layer boards up to 30 sq in. with 7/7 are $210 for 5, including shipping. Turn time is about 10 days including DHL from China. Service is not as fast as bigger outfits like Advanced Circuits, but still fine. |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | === [http://www.batchpcb.com/ BatchPCB] === | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | [http://www. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
* $2.50 / square inch + $10 setup: double-sided with silk screen and solder mask on both side. | * $2.50 / square inch + $10 setup: double-sided with silk screen and solder mask on both side. | ||
Line 425: | Line 31: | ||
Must use your own software to generate Gerber files. | Must use your own software to generate Gerber files. | ||
Easy-to-use web ordering interface, but slow turnaround time -- sometimes 30 days. | Easy-to-use web ordering interface, but slow turnaround time -- sometimes 30 days. | ||
− | |||
− | |||
− | |||
− | |||
Sparkfun forum: [http://forum.sparkfun.com/viewforum.php?f=16 PCB Deal Details] | Sparkfun forum: [http://forum.sparkfun.com/viewforum.php?f=16 PCB Deal Details] | ||
− | + | === [http://www.4pcb.com/ Advanced Circuits] === | |
− | + | Good online design rule checking, easy web ordering interface, and small standard trace/space tolerances. Students can order single PCB's for [http://www.33each.com/ $33 each]. | |
− | |||
− | |||
− | === | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
[http://petertodd.ca/tech/electronics/ Peter Todd] mentions "bare bones prototype: printed circuit boards" http://BareBonesPCB.com/ : | [http://petertodd.ca/tech/electronics/ Peter Todd] mentions "bare bones prototype: printed circuit boards" http://BareBonesPCB.com/ : | ||
Line 511: | Line 54: | ||
* minimum pad size: 0.024" (minimum [http://www.4pcb.com/index.php?load=content&page_id=15 0.014" over finished hole size ]) | * minimum pad size: 0.024" (minimum [http://www.4pcb.com/index.php?load=content&page_id=15 0.014" over finished hole size ]) | ||
− | === | + | === [http://www.olimex.com/pcb/ Olimex] === |
− | + | Bulgarian PCB manufacturer - $33 for a 6.3" by 3.9" board. I.E. cheaper than BatchPCB, but with a minimum board size requirement, and a more complicated ordering process. | |
− | [http://www.olimex.com/pcb/ Olimex] | + | ''(shipping cost?)'' |
− | Bulgarian PCB manufacturer - | ||
− | |||
− | |||
[http://olimex.com/pcb/dfm.html preferred]: | [http://olimex.com/pcb/dfm.html preferred]: | ||
Line 527: | Line 67: | ||
* minimum track/spaces: 0,203 mm (0,008") | * minimum track/spaces: 0,203 mm (0,008") | ||
* minimum via hole size: ??? ; minimum via pad size: ??? | * minimum via hole size: ??? ; minimum via pad size: ??? | ||
− | |||
− | + | === [http://www.sunstone.com/ Sunstone Circuits] aka [http://www.pcb123.com/ PCB123] === | |
− | [http://www. | + | ''(FIXME:)'' |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | Sunstone Circuits | |
− | |||
− | + | Offsers three product lines: | |
− | |||
* Quickturn | * Quickturn | ||
* Full-feature | * Full-feature | ||
− | + | * PCB123 | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
- [http://www.sunstone.com/QuoteQt.aspx Quickturn] - | - [http://www.sunstone.com/QuoteQt.aspx Quickturn] - | ||
Line 574: | Line 99: | ||
Wide range of capabilities, price depends on exact [http://www.sunstone.com/products-services.aspx specifications]. Instance online quote. | Wide range of capabilities, price depends on exact [http://www.sunstone.com/products-services.aspx specifications]. Instance online quote. | ||
− | + | - [http://www.sunstone.com/PCB123.aspx PCB123] - | |
+ | |||
+ | Sunstone's own free (proprietary) schematic and PCB layout software -- easy to use, but you are locked into using their service unless you're willing to pay $50 for gerber files from them. Integration with ordering system simplifies the process of ordering boards. Unrestricted design size, live quoting of diki-key parts withing the bill of materials view. | ||
− | [http://www.pcbexpress.com/ | + | === [http://www.pcbexpress.com/ PCBEXPRESS] === |
All orders submitted before noon ship the next day. UPS ground shipping is free. Since they are located in the Portland, OR area this means you can get a board overnight to most places in the Northwest US. | All orders submitted before noon ship the next day. UPS ground shipping is free. Since they are located in the Portland, OR area this means you can get a board overnight to most places in the Northwest US. | ||
Line 584: | Line 111: | ||
EAGLE CAM export and design rule check scripts are provided. | EAGLE CAM export and design rule check scripts are provided. | ||
− | + | PCBEXPRESS is apparently a division of Sunstone Circuits Quickturn service. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | === [http://www.pcbfabexpress.com/ PCBFABEXPRESS] === | ||
+ | 5 Boards for $60 ($12 ea. for 10 sq. inches) with a 5 day turn time. Good quality work, but turn times can be delayed if you have to correct any issues that don't meet their specs. | ||
+ | === [http://www.apcircuits.com AP Circuits] === | ||
'''2 boards, 2 layers next day shipping for as low as 7.95 each.''' or '''2 boards, 2 layers, 2 solder masks and legend one side for as low as 9.95 each. 3 Day Service''' | '''2 boards, 2 layers next day shipping for as low as 7.95 each.''' or '''2 boards, 2 layers, 2 solder masks and legend one side for as low as 9.95 each. 3 Day Service''' | ||
Line 605: | Line 124: | ||
Instructions for creating Gerber and NC output from many popular PCB programs are also on this site. | Instructions for creating Gerber and NC output from many popular PCB programs are also on this site. | ||
− | |||
− | [http://www.e-teknet.com/ E-TekNet] | + | === [http://www.e-teknet.com/ E-TekNet] === |
− | 4 2 layer boards for $ | + | 4 2 layer boards for $23.99 each. Great prices for production board runs. Helpful staff. |
preferred: ''(FIXME:)'' | preferred: ''(FIXME:)'' | ||
Line 615: | Line 133: | ||
* minimum 0.004" (0.1 mm) trace/space | * minimum 0.004" (0.1 mm) trace/space | ||
* minimum finished hole size: 0.008" (0.2 mm) | * minimum finished hole size: 0.008" (0.2 mm) | ||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | === [http://www.expressPCB.com/ ExpressPCB] === | ||
Free proprietary schematic and layout software, used for all board services (like PCB123). Simplifies the process of getting a board done and out, by vertically integrating the design and production flow. Fewer options and less power, but fewer ways to screw up. | Free proprietary schematic and layout software, used for all board services (like PCB123). Simplifies the process of getting a board done and out, by vertically integrating the design and production flow. Fewer options and less power, but fewer ways to screw up. | ||
− | *Good deal on small prototypes: Mini-Board Service (3 identical boards, 2.5" X 3.8", doublesided, plated through, no silkscreen | + | *Good deal on small prototypes: Mini-Board Service (3 identical boards, 2.5" X 3.8", doublesided, plated through, no silkscreen) is priced well at $51 total, plus $10 shipping. Orders placed by 2PM ET ship the next business day by 2nd Day Air. |
− | |||
*Software features: SCH netchecks. PCB imports PADS netlists, and illuminates nets nodes to assist in connection. Built-in updated price quotes for all offered board services. Copy to clipboard available for schematic & silkscreen+pads(layers must be screen-captured.) Pretty good selection of components, pads, symbols, for free. | *Software features: SCH netchecks. PCB imports PADS netlists, and illuminates nets nodes to assist in connection. Built-in updated price quotes for all offered board services. Copy to clipboard available for schematic & silkscreen+pads(layers must be screen-captured.) Pretty good selection of components, pads, symbols, for free. | ||
*Notes: No Gerber support. Primitive single-level undo/redo. No PCB footprint selection/placement wizard from SCH info. No autorouting. SCH generates BOM, but PCB can't back-annotate (frustrating because most PCB footprints have Digikey part#s.) No net-based vendor integration. No scripting or plugins integration. Not enough keyboard shortcuts, uneditable. | *Notes: No Gerber support. Primitive single-level undo/redo. No PCB footprint selection/placement wizard from SCH info. No autorouting. SCH generates BOM, but PCB can't back-annotate (frustrating because most PCB footprints have Digikey part#s.) No net-based vendor integration. No scripting or plugins integration. Not enough keyboard shortcuts, uneditable. | ||
Line 629: | Line 142: | ||
*Conclusion: The sweet spot for ExpressPCB is sparse, simple, quickly-designed boards, at low and very high quantities. At any other density or complexity, might as well learn and use Eagle or KiCAD. | *Conclusion: The sweet spot for ExpressPCB is sparse, simple, quickly-designed boards, at low and very high quantities. At any other density or complexity, might as well learn and use Eagle or KiCAD. | ||
− | === | + | === [http://pcbcart.com/ PCBCART] === |
− | + | Fast turnaround (~8days + shipping), instant online quotes. $30 tooling fee, under $2/sq in. | |
− | [http://pcbcart.com/ PCBCART] | ||
− | |||
− | + | === [http://www.speedypcb.com/ Speedy PCB Prototype] === | |
− | |||
− | |||
− | [http://www.speedypcb.com/ Speedy PCB Prototype] | ||
No minimum order, $9.9 for protos, no extra charge for soldermask, silkscreen, E-testing, very low price on 2, 4, 6 layers. | No minimum order, $9.9 for protos, no extra charge for soldermask, silkscreen, E-testing, very low price on 2, 4, 6 layers. | ||
− | === | + | === [http://www.yongxinya.com/en/about.asp YongXinYaPCB] === |
+ | quick turn prototype and vol production choice, based in CN, price competitive while quality guarantee, contact for more detail: georgehgm@gmail.com | ||
− | [http:// | + | === [http://rocacircuits.com/ Roca Printed Circuits] === |
− | + | ''(FIXME:)'' | |
− | + | === [http://www.pcb4u.com/ Accutrace] === | |
− | + | ''(FIXME:)'' | |
− | |||
− | |||
− | === | + | === [http://ourpcb.com/ OurPCB] === |
− | [http:// | ||
''(FIXME:)'' | ''(FIXME:)'' | ||
+ | [http://ourpcb.com/price.php prototype prices]: 3 small 2 sided prototype boards for a total of $54 + $22 shipping. | ||
− | === | + | === [http://pcb-pool.com/ppus/info.html PCB-POOL] === |
− | |||
− | [http:// | ||
− | |||
− | |||
− | |||
− | |||
− | |||
''(FIXME:)'' | ''(FIXME:)'' | ||
− | === | + | === [http://pcbpro.com/ PCBpro] === |
− | |||
− | [http:// | ||
− | |||
''(FIXME:)'' | ''(FIXME:)'' | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | [http:// | + | === [http://custompcb.com/ Custom PCB] === |
''(FIXME:)'' | ''(FIXME:)'' | ||
− | === | + | === [http://myropcb.com/ Myro PCB] === |
− | |||
− | [http:// | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | === | ||
− | |||
− | |||
''(FIXME:)'' | ''(FIXME:)'' | ||
− | [http:// | + | [http://myropcb.com/fab.html capabilities]: |
− | |||
− | |||
− | |||
− | + | 4 small (max. 30 sq. inch) 2 sided prototype boards for a total of | |
+ | $80 + $35 shipping | ||
− | + | * Min. track/space 0.015 mm (0.006"). ''(This looks like a typo -- is it really 0.15 mm ?)'' | |
− | + | * 0.35 mm via hole (0.014") | |
− | + | * 0.32 mm inner clearance (0.013"). | |
− | |||
− | + | === [http://www.pcbnet.com/ Imagineering, Inc.] === | |
− | |||
− | |||
− | |||
− | |||
− | [http://www.pcbnet.com/ Imagineering, Inc.] | ||
''(FIXME:)'' | ''(FIXME:)'' | ||
Line 753: | Line 197: | ||
* instant online quote | * instant online quote | ||
− | === | + | === [http://www.onboardcircuits.com/ Onboard Circuits] === |
− | |||
− | [http://www.onboardcircuits.com/ Onboard Circuits] | ||
''(FIXME:)'' | ''(FIXME:)'' | ||
− | + | [http://www.onboardcircuits.com printed circuit boards]: | |
− | + | *Accurate, Fast PCB Quotes. OnBoardCircuits.com is the easiest Printed Circuit Board PCB quote site on the internet. We strive to make your purchasing process simple. From quick-turn prototype and ramp-to-volume production boards to full-scale production printed circuit boards, every phase is monitored and managed by highly qualified professionals. | |
− | * | ||
− | === | + | === [http://www.gcaero.com/ GC Aero] === |
− | |||
− | [http://www.gcaero.com/ GC Aero] | ||
[http://www.gcaero.com/htm/capabilities.htm capabilities:] | [http://www.gcaero.com/htm/capabilities.htm capabilities:] | ||
Line 771: | Line 210: | ||
"GC Aero specializes in the design and manufacture of flexible circuits and completed assemblies." | "GC Aero specializes in the design and manufacture of flexible circuits and completed assemblies." | ||
− | === | + | === [http://www.minco.com/products/flex.aspx Minco] === |
− | |||
− | [http://www.minco.com/products/flex.aspx Minco] | ||
[http://www.minco.com/products/flex.aspx?id=112 capabilities:] | [http://www.minco.com/products/flex.aspx?id=112 capabilities:] | ||
Line 779: | Line 216: | ||
"Minco has the ability to wind flat inductive coils and laminate them within flex circuits." | "Minco has the ability to wind flat inductive coils and laminate them within flex circuits." | ||
− | === | + | === [http://www.uniflexcircuits.com/ Uniflex Circuits] === |
− | |||
− | [http://www.uniflexcircuits.com/ Uniflex Circuits] | ||
− | |||
''(FIXME:)'' | ''(FIXME:)'' | ||
Line 797: | Line 231: | ||
* minimum pad size: 0.038" (calculated from min drill size + 2*annular ring) | * minimum pad size: 0.038" (calculated from min drill size + 2*annular ring) | ||
− | === | + | === [http://pwtpcbs.com/ Printed Wiring Technologies Ltd] === |
− | |||
− | [http://pwtpcbs.com/ Printed Wiring Technologies Ltd] | ||
[http://www.pwtpcbs.com/pwt/index.php?option=com_content&task=view&id=14 capabilities:] | [http://www.pwtpcbs.com/pwt/index.php?option=com_content&task=view&id=14 capabilities:] | ||
Line 820: | Line 252: | ||
* Minimum Inner Clearance: 0.216mm (8.5thou) | * Minimum Inner Clearance: 0.216mm (8.5thou) | ||
− | === | + | === [http://www.seeedstudio.com/depot/pcba-service-c-12.html Seeed Studio] === |
− | [http://www. | + | Hobbyists created studio with PCB/PCBA services, they have outstanding communication among Chinese. They have some $10 offer for rather small board and $89 for combined designs. A very good alternative if you don't need it in a rush, or in large volume. Eagle files are accepted too. |
+ | [http://www.seeedstudio.com/blog/?p=22 "An idea about open source PCBs"]. | ||
+ | [http://www.seeedstudio.com/depot/domino-pcb-service-cost-per-sqcm-p-68.html DOMINO PCB service]: | ||
+ | $49 + $0.12 per sq.cm, . | ||
+ | 2 layers, silk screen both sides, soldermask both sides, free shipping. | ||
− | + | [http://www.seeedstudio.com/depot/propaganda-pcb-service-for-open-source-works-p-111.html Propaganda - PCB service for open source works]: | |
− | * | + | $30 per board, qty 5, max 10cm*10cm each. |
− | + | 2 layers, silk screen both sides, soldermask both sides, +shipping (?) -- must be open-source and allow seeedstudio to offer the boards to others. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
=== MicroConnex === | === MicroConnex === | ||
− | |||
− | |||
[http://www.microconnex.com/ MicroConnex] | [http://www.microconnex.com/ MicroConnex] | ||
Line 849: | Line 274: | ||
* ... | * ... | ||
− | |||
− | |||
− | |||
− | + | == Other fab lists == | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | === | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Other web sites with a short list of recommendations: | Other web sites with a short list of recommendations: | ||
* [http://www.electricstuff.co.uk/pcbs.html "How to make really really good homemade PCBs"] by Mike Harrison 2007 | * [http://www.electricstuff.co.uk/pcbs.html "How to make really really good homemade PCBs"] by Mike Harrison 2007 | ||
* [http://diydrones.com/profiles/blog/show?id=705844%3ABlogPost%3A30196 "PCB fabbing advice"] by Chris Anderson 2008 | * [http://diydrones.com/profiles/blog/show?id=705844%3ABlogPost%3A30196 "PCB fabbing advice"] by Chris Anderson 2008 | ||
− | |||
− | |||
− | |||
Other web sites with long lists of PWB fabricators: | Other web sites with long lists of PWB fabricators: | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
* http://massmind.org/techref/pcbfabs.htm | * http://massmind.org/techref/pcbfabs.htm | ||
− | * | + | * http://dmoz.org/Business/Electronics_and_Electrical/Contract_Manufacturing/Printed_Circuit_Boards/ |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
---- | ---- | ||
[[Category:Manufacturers]] | [[Category:Manufacturers]] | ||
[[Category:Suppliers]] | [[Category:Suppliers]] |