Editing Microcontrollers

=Microcontrollers=


First, a few definitions:

* a '''CPU''' is something that can execute software programs. The earliest CPUs were built out of many parts, but now most CPUs are in microprocessors.
* a '''microprocessor''' is a kind of single [[Integrated Circuits|integrated circuit]] that includes an entire CPU. In the earliest microprocessors, and some famous kinds of microprocessors still being made, the CPU fills the entire chip, and so require external RAM and ROM/FLASH memory. But now most CPUs sold are in microcontrollers[http://www.circuitcellar.com/library/designforum/silicon_update/3/index.asp].
* A '''microcontroller''' is a kind of microprocessor that, in addition to the CPU, also includes RAM, ROM/FLASH memory, and digital I/O on a single chip. Many microcontrollers also have a UART, analog to digital convertors, and even comparators on the same chip/die/package.

A microcontroller is a little computer on a single Die/Package.  The computer includes a CPU core, RAM, ROM/FLASH, and peripherals often including UARTS, A/D converters, SPI, and I2C. Microcontrollers differ from microprocessors in that the microprocessors generally have bigger more powerful central processing units, but need support chips for ram, rom and other peripherals.  Most modern microcontrollers use FLASH ram instead of a ROM so they can be programmed over and over. Most modern microcontrollers support in-system programming (ISP) or in-circuit serial programming (ICSP) or some similar protocol to enable a programmer/debugger to burn a program (often a bootloader) into the microcontroller after the microcontroller has been soldered in, without pulling the chip from the circuit.  Many modern microcontrollers allow self-flashing to enable bootloading or a firmware update without using a programmer/debugger.

Unlike PCs, which have a wide range of programming languages available, microcontrollers have only a few programming languages available -- C programming language, Basic programming language, Forth programming language, assembly language, and (on a few microcontrollers) Python programming language.

Microcontrollers and microprocessors only understand machine code and compilers regardless of type all translate the program to machine code. Machine code, while tedious to learn and device specific, is the most efficient. 

People often have strong opinions about their favorite programming language[http://embeddedadventures.blogspot.com/2008/04/4compilers.html].



==General==


Many hobbyists use microcontrollers, sometimes even multiple microcontrollers, in their [[projects]].
Prices have fallen below $5 for the cheapest 32-bit microcontroller and below $1 for the cheapest 8-bit microcontroller.

''I've written a little about the various kinds of microcontrollers at [http://en.wikibooks.org/wiki/Embedded_Systems/Particular_Microprocessors Wikibooks: Embedded Systems]. --[[User:DavidCary|DavidCary]] 06:15, 10 March 2007 (PST)''


About 55% of all CPUs sold in the world are 8-bit microcontrollers. Over 2 billion 8-bit microcontrollers were sold in 1997.[http://www.circuitcellar.com/library/designforum/silicon_update/3/index.asp]
''(Anyone have more up-to-date statistics?)''

Somebody always thinks their microcontroller is the best microcontroller, so we have listed all of them as best.

== Microchip PIC ==

* [[PIC Links]] A bunch of links to PIC based information and projects
* [[Microchip]] PIC 8 bit FLASH microcontrollers
* [[Microchip]] dsPIC/PIC24 16 bit FLASH microcontrollers 
* [[DsPIC30F 5011 Development Board]] 
* [[Microchip]] PIC32 32 bit FLASH microcontrollers
* PIC based [[Demo board]]

: ''consider merging the following section to [http://en.wikibooks.org/wiki/Embedded_Systems/PIC_Microcontroller#Which_PIC_to_Use Which PIC to use], to gain the advantages of [http://communitywiki.org/ConsolidateInformation consolidating information].''

Note about choosing a PIC:

The number of PIC models is huge so it is worth saying a few words on how to choose a PIC.  

Things to consider as a hobbiest or making a small production run:

* Microchip tends to produce the same chip with minor variations.  The exact same chip with the exact same pinout may be available in 8k, 16k, or 32k flash.  Spend a few extra pennies and take the best.
* SMT parts take practice to work with, so beginners should focus on DIP package parts with <= 40 pins. On the other hand, SMT parts can yield simpler and smaller PCB designs so they are worth consideration even for a hobbiest. 
* Contrary to common sense, older parts are often more expensive then newer parts. 
* Consider if a free/student version of a C compiler is availible.  Microchip provides free/student student versions for the 18f,dsPIC/PIC24, and PIC32.

List of some of the best PICs for hobby purposes:

{| border="1"
|PIC
|Pin Count
|Important Features
|Typical Use
|-
|PIC12F683
|8
|ADC, I/O PWM, Comparator
|Very Simple Projects/Glue Logic
|-
|PIC16F88
|18
|ADC, I/O PWM, Comparator, UART, I2C/SPI
|General Purpose
|-
|18F2620
|28
|ADC, I/O PWM, Comparator, UART, I2C/SPI
|General Purpose
|-
|18F4620
|40
|ADC, I/O PWM, Comparator, UART, I2C/SPI, 8 Bit Parallel Port
|General Purpose
|-
|18F2550/18F2553
|28
|ADC, I/O PWM, Comparator, UART, I2C/SPI, USB
|USB Connectivity
|-
|18F4550/18F4553
|40
|ADC, I/O PWM, Comparator, UART, I2C/SPI, USB, 8 Bit Parallel Port
|USB Connectivity
|-
|P24FJ64GA002
|28
|ADC, I/O PWM, Comparator (with software selectable pin assignment), 2 UART, 2 I2C, 2 SPI
|General Purpose
|}

Note: J means the PIC is a native 3.3V part.  Other PICs will run at 3.3V but only at slower clock speeds.

External Links:

== Atmel AVR ==

Atmel's line of 8 and 32-bit RISC microcontrollers are extremely easy to use and a great choice for beginners. With four series&mdash;ATtiny, ATmega, ATxmega, and AVR32&mdash;there is a large variety in price, processing power, and size, making it simple to meet a variety of needs. Many small chips are available in a [[DIP]] package that allows for quick prototyping and breadboard use.

Combined with an AVRDragon for about 60€ everybody with a budget of about 70€ is able to build and debug his own microprocessor applications. The AVRDragon allows you to debug all ATmega & ATtiny processors with less than 32k flash using DebugWire or JTAG and to program all ATmega / ATtiny devices using HVPP, ISP and JTAG.

=== [[ATtiny]] ===

Small and somewhat lacking in I/O, but still quite powerful (20MHz System Clock, 20MIPS, 64MHz Fast  Peripheral Clock). Ideal for small spaces, limited resources, or a tight budget.

Features include 10bit ADCs, USI, 8/16bit timer, PWM, I²C, SPI , BOD, and WDT.

=== ATmega ===

Middle of the road AVR with a good amount of I/O and a large amount of processing power.

Features include 10bit ADCs, USARTs, 8/16bit timer, I²C, SPI, BOD, and WDT.

Processors:

* ATmega88
* ATmega16/32
* ATmega640/1280/2560
* ATmega1281/2561

=== ATxmega ===

Geared toward application that require a large amount of processing power or a large number of I/O. 

Features include 12bit ADC, 12bit DAC, 16 bit timer, USARTs, SPI, I²C, DMA, real time clock, crypto engine.

Processors:

* ATxmega64A1/128A1/192A1/256A1
* ATxmega64A3/128A3/192A3/256A3

=== AVR32 ===

High performance 32-bit microcontroller for multimedia purposes, with system clocks of 200 MHz or more.

Processors:

* AP7000
* AP7001
* AP7002
* AT32UC3A0128/0256/0512

=== Links ===

* [[Arduino Links]] Arduino is a development board based on AVR Microcontrollers
* [[Atmel]] AVR 8 bit FLASH microcontrollers
* [http://www.atmel.com/products/AVR/ Atmel] ATmega & ATtiny
* [http://www.atmel.com/products/AVR/default_xmega.asp Atmel] ATxmega
* [http://www.atmel.com/products/AVR32/ Atmel] AVR 32
* [http://makecircuits.com/blog/2009-03-23-simplest-atmega8-programmer-using-lpt-port.html Simplest AVR programmer Using LPT Port]

== Development Boards ==
Development Boards are printed circuit boards that contain a microcontroller and enough circuitry to get it going, typically at least some of the following: clock, voltage regulator, reset button, communications chip, buffer amplifiers, led's, prototyping area, and/or off chip connections.  Sometimes the manufacturer of the chip sells development boards ( often called evaluation boards ).  Development boards can be really basic, just enough to make the processor run, with connections to the IO pins.  Or the boards can include communications, displays, input buttons etc.  Often you can jump start a project by using a development board that does the boring standard stuff and let you focus on your project.  The development board can let you use high density parts and surface mount parts that you might not want to mess with.  The BitWacker kit from [[SparkFun]] is priced close the to the total price of the parts.  This is probably true of some other development boards as well.  Note that some development boards require you to build them they have not been made available as kits, some come both ways.

*[[Chalk Roach]] based on AVR Atmega32
*[[Arduino Links]]  Arduino is based on AVR Microcontrollers
*[[USB Bit Whacker]]  This is a PIC 18 based system  ... can be used with [[BitWacker Java Communications]]
*[[RS232 Dev Board]]
*[[dsPIC30F 5011 Development Board]]
* [http://www.gogoboard.org GoGo Board] based on PIC18F4550 (via [http://www.blikstein.com/paulo/index.html Prof. Paulo Blikstein]): "an open-source platform that is designed to be low-cost and allow for local assembly by those who are interested." All parts are through-hole (even the USB connector). KiCAD PCB design files.


Other demo boards: see [[demo board]].

== Cypress PSoC ==

* Cypress PSoC 8 bit FLASH microcontrollers.

External Links:
* [http://en.wikibooks.org/wiki/Embedded_Systems/Cypress_PSoC_Microcontroller Wikibooks: Cypress PSoC]
* [http://www.sparkfun.com/commerce/product_info.php?products_id=8480 SparkFun: Gainer PSoC Development Board] including USB interface -- looks very similar to the [[Arduino Links | Arduino Nano]]

== ARM ==

* [[Image:lpc2103.jpg|69px|LPC2103]] [http://www.k9spud.com/arm/lpc2103/ LPC2103] Low cost 70MHz ARM7TDMI-S FLASH Microcontroller from Philips. The  [http://coridiumcorp.com/arm7/ "$49" "Coridium ARMmite"]  does use this chip.
* the [http://www.open-research.org.uk/ARMuC/ ARM microcontroller wiki].

There are no ARM chips currently manufactured in a through-hole package -- they are *all* surface-mount.
However, there are many "adapter boards" aka [[demo board]] that make them easier to use, such as:
* low-cost ARM demo boards at NGX Technologies: [http://shop.ngxtechnologies.com/index.php?cPath=21]
* $10 STMicroelectronics’ STM32 Discovery Kit with ARM® Cortex-M3 microcontroller [http://www.st.com/internet/com/press_release/p3065.jsp] [http://www.st.com/internet/evalboard/product/250863.jsp]
* [[Motherboards that run Linux]]

== further reading ==

* [[Microcontrollers for Beginners]]
* [[Using ADCs]]
* [[Microcontroller Serial Communications Articles]]

* [http://www.instructables.com/id/How-to-choose-a-MicroController/ Instructables: How to choose a MicroController]
* Thomas A. Coonan. [https://web.archive.org/web/20120117133103/http://www.mindspring.com/~tcoonan/design.html "Microcontroller Design Checklist. Or, My Top Seven uController Issues"].
* [http://www.digikey.com/techxchange/thread/4280 "Help Me Select a Microcontroller"].
* [http://en.wikibooks.org/wiki/Embedded_Systems/Particular_Microprocessors#brief_selection_guide Wikibooks: brief selection guide]
*[http://www.veys.com/index.php?title=Main_Page Main Page] May have been a one man effort, now dropped.  Has a bit of content that looks good.
*[http://people.ece.cornell.edu/land/courses/ece4760/FinalProjects/ Cornell University ECE 4760 Designing with Microcontrollers Final Projects] A ton on projects.
*[http://forum.allaboutcircuits.com/showthread.php?t=21358 Which uC (Microcontroller)? - discussion]
*[http://www.ladyada.net/library/picvsavr.html PIC vs. AVR Ultimate fight]
* [http://chiphacker.com/questions/1092/whats-the-difference-between-a-microcontroller-and-a-microprocessor Chiphacker: "What’s the difference between a microcontroller and a microprocessor?"]
* [http://piclist.com/techref/piclist/begin.htm "Beginners checklist for PIC Microcontrollers"].


[[category:microcontroller]][[Category:Components]]