Difference between revisions of "Linuxstamp mx27"

From OpenCircuits
Jump to navigation Jump to search
(New page: == Main == This is a place holder for the Linuxstamp mx27 board. Details will be posted as they are available. == Redboot == Redboot is based on ecos. A good starting point is [http://eco...)
 
Line 5: Line 5:
 
Redboot is based on ecos. A good starting point is [http://ecos.sourceware.org/getstart.html here]
 
Redboot is based on ecos. A good starting point is [http://ecos.sourceware.org/getstart.html here]
 
First pull the installer
 
First pull the installer
  * wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl
+
  $ wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl
 
Then run it:
 
Then run it:
  * ./ecos-install.tcl
+
  $ ./ecos-install.tcl
It wants to run ecosenv.sh so set up the environment correctly. It says to stick it in .profile or .login. I think .bashrc will also work
+
It wants to run ecosenv.sh so set up the environment correctly. It says to stick it in .profile or .login. I think .bashrc will also work.
 +
Install old compat-libstdc
 +
# yum install compat-libstdc++-3

Revision as of 13:29, 11 May 2009

Main

This is a place holder for the Linuxstamp mx27 board. Details will be posted as they are available.

Redboot

Redboot is based on ecos. A good starting point is here First pull the installer

$ wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl

Then run it:

$ ./ecos-install.tcl

It wants to run ecosenv.sh so set up the environment correctly. It says to stick it in .profile or .login. I think .bashrc will also work. Install old compat-libstdc

# yum install compat-libstdc++-3