Linuxstamp

From OpenCircuits
Revision as of 18:23, 17 April 2007 by 24.121.9.24 (talk)
Jump to navigation Jump to search

Description

The Linuxstamp is designed to be a general purpose processor module. It is designed to work as a stand alone module (SD card, ethernet and USB/Serial converter are all on the module). This allows all initial development to be done without a motherboard, but for integration into a specific project a motherboard with specific features could be designed.

Features

-Atmel AT91RM9200 processor (Arm9 processor with MMU)
-32Mb SDRAM (Only limited by 1x 54-TSOP SDRAM chip)
-8Mb SPI Dataflash
-1x 10/100 Ethernet
-1x USB host port
-1x SD card slot
-Serial debug port access through FTDI USB/Serial converter

Licence

All files for this project are licensed under the GNU GPL V2

Project files

PCB Top view (pdf)
PCB Bottom view (pdf)
Schematic (pdf)

Status

Links

  • Atmel: AT91RM9200 info on Atmel's site
  • [1]: Up to date kernel patch

Pricing

The parts cost for qty 1 is $75 from digikey, and $55 for qty 100
I'm sure this can be greatly reduced with higher quantity
We will make a small run soon, and I will let you know when these are available