Linuxstamp
Revision as of 09:28, 16 April 2007 by Linuxvolts (talk | contribs)
Description
The Linuxstamp is designed to be a general purpose processor module. It is designed to work as a stand alone module (SD card, ethernet and USB/Serial converter are all on the module). This allows all initial development to be done without a motherboard, but for integration into a specific project a motherboard with specific features could be designed.
Features
-Atmel AT91RM9200 processor (Arm9 processor with MMU)
-32Mb SDRAM (Only limited by 1x 54-TSOP SDRAM chip)
-8Mb SPI Dataflash
-1x 10/100 Ethernet
-1x USB host port
-1x SD card slot
-Serial debug port access through
Licence
All files for this project are lecenced under the GNU GPL V2
Project files
zipped project directory
PCB Top view (pdf)
PCB Bottom view (pdf)
Schematic (pdf)
