Difference between revisions of "Linuxstamp"

From OpenCircuits
Jump to navigation Jump to search
Line 15: Line 15:
  
 
== Project files ==
 
== Project files ==
[[Media:at91_linuxstamp_20070416.zip|zipped project directory]]
+
[[Media:at91_linuxstamp_20070416.zip|zipped project directory]]<br>
 
[[Media:at91-rev1.1.0-top.pdf|PCB Top view (pdf)]]
 
[[Media:at91-rev1.1.0-top.pdf|PCB Top view (pdf)]]
  

Revision as of 09:27, 16 April 2007

Description

The Linuxstamp is designed to be a general purpose processor module. It is designed to work as a stand alone module (SD card, ethernet and USB/Serial converter are all on the module). This allows all initial development to be done without a motherboard, but for integration into a specific project a motherboard with specific features could be designed.

Features

-Atmel AT91RM9200 processor (Arm9 processor with MMU)
-32Mb SDRAM (Only limited by 1x 54-TSOP SDRAM chip)
-8Mb SPI Dataflash
-1x 10/100 Ethernet
-1x USB host port
-1x SD card slot
-Serial debug port access through

Licence

All files for this project are lecenced under the GNU GPL V2

Project files

zipped project directory
PCB Top view (pdf)

Status

Links