GM862 SMD Connector

From OpenCircuits
Revision as of 13:16, 26 January 2006 by Sparkfun (talk | contribs)
Jump to navigation Jump to search

GM862 SMD Connector

Description:
This is the Molex SMD connector that interfaces to the GM862 Cellular Modules. If you're prototyping with the GM862, you pretty much have to have one of these. Watch out, it's 0.5mm pitch, 50-pin, SMD connector. You can solder it by hand, but you'll need some experience, solder wick, and a decent iron. You can also reflow it with a hot-plate and a stencil. If you're not comfortable soldering it, there are breakout boards and designs available from SFE.

Documents:
Molex Connector Footprint and Spec Sheet

Footprints:
Coming in a minute from SFE.

Manufacturer Info:
Molex part # : 53748-0504

http://www.molex.com - Oh yea, they have free samples. But it can take a few days, and it's only available for parts in stock. Oh shoot, do we need a manufacturers area? Eeek.

Related Items:
GM862 Cellular Module

Original Creator: --Sparkfun 12:08, 26 January 2006 (PST)