Difference between revisions of "Controlino Notes"
Jump to navigation
Jump to search
Russ hensel (talk | contribs) |
Russ hensel (talk | contribs) |
||
| Line 1: | Line 1: | ||
= Draft = | = Draft = | ||
| − | Just a draft may or may not be completed. | + | Just a draft may or may not be completed. See also: [[Controlino Notes]] |
| − | |||
| − | [[Controlino Notes]] | ||
= What is Controlino = | = What is Controlino = | ||
| − | + | It is the Arduino component of [[Instrumentino Notes]] | |
| − | |||
Links to what the authors think: | Links to what the authors think: | ||
| Line 14: | Line 11: | ||
* https://github.com/yoelk/controlino | * https://github.com/yoelk/controlino | ||
| − | |||
= Get it Running = | = Get it Running = | ||
| Line 34: | Line 30: | ||
= Protocol = | = Protocol = | ||
| − | Reading the code and probing with my terminal | + | What is the Protocol? Have not found any documents. Reading the code and probing with my terminal. Send a command and get a response. |
* commands appear not to be caps sensitive | * commands appear not to be caps sensitive | ||
* use a cr at end of commands | * use a cr at end of commands | ||
| + | * at end of command Arduino says "done/r" | ||
* BlinkPin <pin> <ms to blink> | * BlinkPin <pin> <ms to blink> | ||
Revision as of 13:18, 1 October 2016
Draft
Just a draft may or may not be completed. See also: Controlino Notes
What is Controlino
It is the Arduino component of Instrumentino Notes
Links to what the authors think:
Get it Running
I want compile it and run on my Uno. See Russ's Computer Environment
Ton of files ( well maybe 10 ) on gitHub.
- Seems the only one that matters much is controlino.cpp.
- Download it.
- Make a new arduino project. I called mine controlino_ino.
- In the project's file, controlino_ino.ino, paste the contents of controlino.cpp.
- Follow the directions in the file.
- Compile.
- Worked the first time.
- Now have something on my uno. What?
- More comming
Protocol
What is the Protocol? Have not found any documents. Reading the code and probing with my terminal. Send a command and get a response.
- commands appear not to be caps sensitive
- use a cr at end of commands
- at end of command Arduino says "done/r"
- BlinkPin <pin> <ms to blink>
- BlinkPin 7 200 => works
- set xxx yyy => sets pin n to input or output ( digital ) if pin is out of range o..
- set 3 in => think this is correct syntax
- set in 3 => looks incorrect
- set xxx yyy => cannot be valid but no error message, no error may be ok
