Chalk Roach

From OpenCircuits
Revision as of 22:00, 20 February 2012 by DavidCary (talk | contribs) (more specific link)
Jump to navigation Jump to search

Number Six

"The New Number Six - Embedded Microcontroller for Starving Artists"

http://web.media.mit.edu/~nvawter/usb6/

http://web.media.mit.edu/~nvawter/number6/audioBoard


Chalk Roach

This project was developed by the Computing Culture Group at the MIT Media Lab.

It's now called #6!

It's a 2"x2" (5cm x 5cm) one-side printed circuit board that supports the very robust Atmega32 microcontroller.

Because it's one-sided, you can make them at home with Press and Peel Blue a clothes iron, and Ferric Chloride from Radio Shack.

It can be configured minimally with just a tiny handful of components yet connect to so many different things.

Main development page

http://web.media.mit.edu/~nvawter/chalkroach/ via Noah Vawter

MiniSix

The MiniSix is the smaller (26mm x 26mm) surface mount version of the Number Six microcontroller. Atmel AVR ATmega32 The MiniSix board is designed for a vertical stacking strategy using a 40 pin Hirose connector.

The MiniSix platform is availible as open source hardware and is registered with the Open Source Hardware and Design Alliance MiniSix at OHANDA.