Difference between revisions of "Sun Tracker or Irrigation Timer to drive motors"

From OpenCircuits
Jump to navigation Jump to search
Line 1: Line 1:
This is using two LEDs to sense the sun and send +- or -+ logic signals to a full bridge motor driver like L298 or http:/www.redrok.com 3X schematic. I bought his. I recommend it.  
+
This is using two LEDs to sense the sun and send +- or -+ logic signals to a full bridge motor driver like L298 or http:/www.redrok.com LED3X schematic. I bought his. I recommend it.  
  
 
I changed the front end logic to 4060 and 4011 ICs here, for fun. You could use this circuit to turn on an irrigation motor for a very short time every few hours or days (just omit the sun sensor and select appropriate timing pins and much lower oscillation frequency for the 4060).
 
I changed the front end logic to 4060 and 4011 ICs here, for fun. You could use this circuit to turn on an irrigation motor for a very short time every few hours or days (just omit the sun sensor and select appropriate timing pins and much lower oscillation frequency for the 4060).

Revision as of 18:41, 5 August 2016

This is using two LEDs to sense the sun and send +- or -+ logic signals to a full bridge motor driver like L298 or http:/www.redrok.com LED3X schematic. I bought his. I recommend it.

I changed the front end logic to 4060 and 4011 ICs here, for fun. You could use this circuit to turn on an irrigation motor for a very short time every few hours or days (just omit the sun sensor and select appropriate timing pins and much lower oscillation frequency for the 4060).

http://www.opencircuits.com/File:Irrigation_Timer_Sun_Tracker_motor_driver.sch

http://www.opencircuits.com/File:Irrigation_Timer_Sun_Tracker_motor_driver.kicad_pcb

Irrigation Timer Sun Tracker motor driver.png