Difference between revisions of "WikiNode"

From OpenCircuits
Jump to navigation Jump to search
(put related things together)
(put related things together)
Line 50: Line 50:
 
* [http://propeller.wikispaces.com/ Propeller wiki]: dedicated to documenting interesting stuff related to the Parallax Propeller microcontroller. ''needs wikinode''
 
* [http://propeller.wikispaces.com/ Propeller wiki]: dedicated to documenting interesting stuff related to the Parallax Propeller microcontroller. ''needs wikinode''
  
 +
==== vehicles and robots and CNC ====
 +
* [http://evproduction.org/wiki EV production wiki] discusses several electric open source [[vehicle]]s.
 +
* [http://openservo.com/ OpenServo wiki] -- developing a digital servo motor that accepts "Go to position X" commands and also more complex curves, and returns actual servo position, speed, voltage and power consumption.
 +
* [http://www-robotics.usc.edu/~dshell/roboticswiki/ Robotics wiki] ''(offline as of 2007-07-07)''
 +
* [http://pminmo.com/PMinMOwiki/index.php5 the PMinMO.com wiki] describes an open-source CNC machine -- software, electronics, motors, hardware, etc. -- and related information, such as [http://pminmo.com/PMinMOwiki/index.php5?title=CNC_PCB_Milling CNC PCB milling]. (was: [http://pminmo.com/wiki/] ) ''needs WikiNode''
 +
* [http://vems.hu/wiki/ VEMS wiki] has some interesting electronics projects. In particular, the [http://www.vems.hu/wiki/index.php?page=GoBox GoBox project] to tune automobile engines to minimize the amount of fuel used. ''needs wikinode''
  
 
==== other related wiki ====
 
==== other related wiki ====
Line 56: Line 62:
  
 
* [http://kicad.sourceforge.net/wiki/index.php/WikiNode KiCad] is a GPL'd suite of programs for EDA (electronic design automation).
 
* [http://kicad.sourceforge.net/wiki/index.php/WikiNode KiCad] is a GPL'd suite of programs for EDA (electronic design automation).
* [http://evproduction.org/wiki EV production wiki] discusses several electric open source [[vehicle]]s.
 
 
* [http://www.rockbox.org/twiki/ Rockbox wiki] is an open source firmware for mp3 players, written from scratch. It runs on a wide range of players. It nicely complements the [[Music Player]] hardware we discuss here.
 
* [http://www.rockbox.org/twiki/ Rockbox wiki] is an open source firmware for mp3 players, written from scratch. It runs on a wide range of players. It nicely complements the [[Music Player]] hardware we discuss here.
 
* [http://opensourceproductdesign.org/ open source product design] ''is this really a wiki?''
 
* [http://opensourceproductdesign.org/ open source product design] ''is this really a wiki?''
 
* [http://adciv.org/ the advanced civilization wiki] discusses "Open collaborative design", which seems to include the sort of [[open hardware]] designs we share at Open Circuits.
 
* [http://adciv.org/ the advanced civilization wiki] discusses "Open collaborative design", which seems to include the sort of [[open hardware]] designs we share at Open Circuits.
* [http://openservo.com/ OpenServo wiki] -- developing a digital servo motor that accepts "Go to position X" commands and also more complex curves, and returns actual servo position, speed, voltage and power consumption.
 
 
* [http://electronicschat.org/ the Electronics Chat wiki]
 
* [http://electronicschat.org/ the Electronics Chat wiki]
 
* [http://hcvl.hci.iastate.edu/cgi-bin/openEyeswiki/index.cgi the openEyes wiki] discusses an open-source open-hardware toolkit for low-cost real-time eye tracking.
 
* [http://hcvl.hci.iastate.edu/cgi-bin/openEyeswiki/index.cgi the openEyes wiki] discusses an open-source open-hardware toolkit for low-cost real-time eye tracking.
Line 68: Line 72:
 
* [http://wikidevices.org/ Wiki Devices] "a highly organized repository for objective information, as well as opinions on consumer electronics."
 
* [http://wikidevices.org/ Wiki Devices] "a highly organized repository for objective information, as well as opinions on consumer electronics."
 
* [http://wikiindex.com/Build_Your_Own_Arcade the Build Your Own Arcade controls wiki]
 
* [http://wikiindex.com/Build_Your_Own_Arcade the Build Your Own Arcade controls wiki]
* [http://www-robotics.usc.edu/~dshell/roboticswiki/ Robotics wiki] ''(offline as of 2007-07-07)''
 
 
* [http://geda.seul.org/wiki/ the gEDA wiki] discusses "the gEDA project" -- developing a full GPL‘d suite of Electronic Design Automation tools (electrical circuit design, schematic capture, simulation, prototyping, and printed circuit board (PCB) layout.
 
* [http://geda.seul.org/wiki/ the gEDA wiki] discusses "the gEDA project" -- developing a full GPL‘d suite of Electronic Design Automation tools (electrical circuit design, schematic capture, simulation, prototyping, and printed circuit board (PCB) layout.
  
Line 83: Line 86:
 
* [http://wiki.opengraphics.org/ The Open Graphics Project (OGP) is developing graphics cards with fully published specs and open source drivers.] Since the first version will be a FPGA, is also collecting information on FPGA programming and interfacing. Supported by [http://traversaltech.com/ Traversal Technology]. (''was at http://wiki.duskglow.com/ '')
 
* [http://wiki.opengraphics.org/ The Open Graphics Project (OGP) is developing graphics cards with fully published specs and open source drivers.] Since the first version will be a FPGA, is also collecting information on FPGA programming and interfacing. Supported by [http://traversaltech.com/ Traversal Technology]. (''was at http://wiki.duskglow.com/ '')
 
* [http://wikihost.org/wikis/openhardware/ the Open Hardware wiki] has electronics projects of various levels of complexity; the most complicated appears to be "KAD", a FPGA on a PCI card designed for reconfigurable computing.
 
* [http://wikihost.org/wikis/openhardware/ the Open Hardware wiki] has electronics projects of various levels of complexity; the most complicated appears to be "KAD", a FPGA on a PCI card designed for reconfigurable computing.
* [http://pminmo.com/PMinMOwiki/index.php5 the PMinMO.com wiki] describes an open-source CNC machine -- software, electronics, motors, hardware, etc. -- and related information, such as [http://pminmo.com/PMinMOwiki/index.php5?title=CNC_PCB_Milling CNC PCB milling]. (was: [http://pminmo.com/wiki/] ) ''needs WikiNode''
 
 
* [http://protel-users.org/ Protel users wiki], for people who design and draw schematics and circuit boards with Protel.
 
* [http://protel-users.org/ Protel users wiki], for people who design and draw schematics and circuit boards with Protel.
* [http://vems.hu/wiki/ VEMS wiki] has some interesting electronics projects. In particular, the [http://www.vems.hu/wiki/index.php?page=GoBox GoBox project] to tune automobile engines to minimize the amount of fuel used. ''needs wikinode''
 
  
 
==== CPU board wiki ====
 
==== CPU board wiki ====

Revision as of 07:50, 19 October 2010

Welcome to Open Circuits. Open Circuits is a wiki for sharing electronics knowledge, schematics, board layouts, and parts libraries.

key points of interest

wiki-nodes of neighboring wiki

The WikiNode project tries to link every wiki in the world together. Our "WikiNode" links to closely-related wiki (and their WikiNode links back).

If you want to talk about something that is not quite on-topic here at Open Circuits (say, "desktop PC case modding", or "embedded Linux programming"), our WikiNode helps you find another wiki where people love to talk about that exact topic. The corresponding WikiNode on each of those wiki helps people who want to talk about "open hardware" to discover this wiki.

medical electronics wiki

open hardware cell phone wiki

other open wireless communications wiki

microcontroller wiki

vehicles and robots and CNC

  • EV production wiki discusses several electric open source vehicles.
  • OpenServo wiki -- developing a digital servo motor that accepts "Go to position X" commands and also more complex curves, and returns actual servo position, speed, voltage and power consumption.
  • Robotics wiki (offline as of 2007-07-07)
  • the PMinMO.com wiki describes an open-source CNC machine -- software, electronics, motors, hardware, etc. -- and related information, such as CNC PCB milling. (was: [2] ) needs WikiNode
  • VEMS wiki has some interesting electronics projects. In particular, the GoBox project to tune automobile engines to minimize the amount of fuel used. needs wikinode

other related wiki

For open source software (or open source in general) visit the Open Source Wikia.

CPU board wiki

other related wiki

  • Swarmwiki, a wiki for an open hardware group that build swarms of semi-autonomous spherical robots. needs wikinode
  • tgimboej wiki discusses The Great Internet Migratory Box Of Electronics Junk, and the "open source oriented hardware hackers" who receive it. needs wikinode
  • The DataFlow wiki is a wiki about art, new medias, electronics, interaction design, Python, PureData and other dataflow languages.
  • Wockets open-source hardware is a wiki about developing low-cost sensors for measuring physical activity on mobile phones.
  • Synthesizers.com wiki "up-to-date information about synthesizers, patches, modifications, etc." needs wikinode
  • bicycleledpov wiki: A bicycle visual LED artwork
  • Micropendous wiki: Open Hardware Development Boards for the Atmel's Full-Speed (12Mbit/s) USB AVR Microcontrollers (AT90USB162, ATmega32U4, AT90USB646, AT90USB1287)
  • the EcoModder wiki discusses various ways to measure and improve vehicle gas economy, including "MPGuino is an open source fuel economy computer (Arduino based) for any vehicle with electronic fuel injection and a Vehicle Speed Sensor."
  • Noisebridge Noisebridge is an infrastructure provider for technical-creative projects, collaboratively run by its members
  • Wikiants do-it-yourself (in German) has a section on Wikiants: open hardware.
  • Qi hardware wiki: Qi's mission is to promote and encourage the development of copyleft hardware.
  • MakerBot Wiki



Please add closely-related wiki. Keep the 7 or so of the most-closely-related wiki. Move less-relevant wiki to WikiIndex.

Are any of the wiki listed at http://www.communitywiki.org/odd/SoftwareBazaar/MicrocontrollerProgramming relevant enough to list here?