Difference between revisions of "Minimig FPGA"

From OpenCircuits
Jump to navigation Jump to search
(+XC3S500E analyse)
(+XC3S500E analyse)
Line 42: Line 42:
  
 
[[Xilinx XC3S400 and XC3S500E comparison]]
 
[[Xilinx XC3S400 and XC3S500E comparison]]
[[Xilinx XC3S500E]]
+
[[Xilinx XC3S500E pins]]

Revision as of 06:55, 27 August 2007

mongo (070728):
Switching from the Spartan 3 XC3S400 to a Spartan 3E XC3S500E would give you about 17 extra I/O pins while still keeping the 208 pin package. It would also give you a good bit of space for bug fixes and/or future enhancements. The current Minimig design uses up about 82% of the XC3S400, but only 65% of an XC3S500E.

Brand Chip LE/LCs IOs Package Price Distributor
Altera CycloneII EP2C8Q208I8 8256 138 208-PQFP $24.30 digikey
Altera CycloneIII EP3C25Q240C8NES 24624 148 240-PQFP $39.50 digikey
Xilinx Spartan3 XC3S400-4PQ208C 8064 141 208-PQFP $19.25 digikey
Xilinx Spartan3E XC3S500E-4PQG208C 10476 158 208-PQFP $20.75 digikey
Xilinx Enterpoint/Xilinx XC3S1200 ? 219 PGA 110 EUR Enterpoint

Altera chips are slighlty more expensive than Xilinx's.
It is worth considering the Cyclone III if we want to integrate the 680x0 into the FPGA.

However if the cpu is integrated into the fpga, the need for a dedicated board is decreased. One can then use a plain developer board which also include onboard sdram and usually some means of fast communication, Like Digilent XC3S1600E for 295 USD or Enterpoint TF1-250E-1600E for 150 GBP.

FrenchShark:
Use as a south bridge, a CPLD like:

Brand Chip Macrocells IOs Price Free Place%Route Linux support
Altera MAX 3000 EPM3128ATC100-10 128 80 $8.60 No
Xilinx XL9500XL XC95144XL-10TQ100C 144 81 $5.80 Yes

freqmax: I think that considering Linux support + lower price + consistency with the main fpga. I think that the Xilinx option is better choice.
freqmax: Another consideration is that using an fpga instead of an cpld is that options for larger bus expansions like Zorro bus, Harddisc via ATA etc.. becomes viable. Due capability for faster fpga-fpga communications and more I/Os.

The slow IOs from Paula and the 8520s can be moved to the CPLD.
On a real ECS/OCS Amiga, IOs from the 8520s are updated at 700 KHz, IOs from Paula/Denise are updated at 3.5 MHz.
On a real AGA Amiga, the 8520s are slightly faster : the IOs are updated at 1.4 MHz.
If we run a high speed bus at 28 MHz between the FPGA and the CPLD, each wire can "transport" 8 IOs from paula or 20 IOs from a 8520.
The CPLD basically acts as a giant IO demultiplexer.
Moreover, the CPLDs are 5V tolerant and non-volatile.
There is an application note from Altera describing how to use a MAX as an IO expander :
AN 265: Using MAX II & MAX 3000A Devices as a Microcontroller I/O Expander

Xilinx XC3S400 and XC3S500E comparison Xilinx XC3S500E pins