Difference between revisions of "Linuxstamp"
Jump to navigation
Jump to search
(→Links) |
|||
| Line 22: | Line 22: | ||
== Links == | == Links == | ||
| − | *[http://atmel.com/dyn/products/product_card.asp?part_id=2983] | + | *[http://atmel.com/dyn/products/product_card.asp?part_id=2983]: AT91RM9200 info on Atmel's site |
| + | *[http://maxim.org.za/at91_26.html]: Up to date kernel patch | ||
Revision as of 18:37, 16 April 2007
Description
The Linuxstamp is designed to be a general purpose processor module. It is designed to work as a stand alone module (SD card, ethernet and USB/Serial converter are all on the module). This allows all initial development to be done without a motherboard, but for integration into a specific project a motherboard with specific features could be designed.
Features
-Atmel AT91RM9200 processor (Arm9 processor with MMU)
-32Mb SDRAM (Only limited by 1x 54-TSOP SDRAM chip)
-8Mb SPI Dataflash
-1x 10/100 Ethernet
-1x USB host port
-1x SD card slot
-Serial debug port access through FTDI USB/Serial converter
Licence
All files for this project are licensed under the GNU GPL V2
Project files
PCB Top view (pdf)
PCB Bottom view (pdf)
Schematic (pdf)
