Difference between revisions of "ADuC832 Development Board"
Jump to navigation
Jump to search
| (2 intermediate revisions by 2 users not shown) | |||
| Line 5: | Line 5: | ||
[[Image:Aduc832_cable.JPG]] | [[Image:Aduc832_cable.JPG]] | ||
[[Image:Aduc832_connector.JPG]] | [[Image:Aduc832_connector.JPG]] | ||
| + | [[Image:Aduc832_7segment.JPG]] | ||
[[Image:Aduc832_overview.JPG]] | [[Image:Aduc832_overview.JPG]] | ||
[[Image:Aduc832_circuit.png]] | [[Image:Aduc832_circuit.png]] | ||
| + | |||
| + | *[http://chungyan5.no-ip.org/open_data/electronic_computer/Aduc832/Aduc832Programmer.jar Programmer] | ||
| + | *[http://chungyan5.no-ip.org/open_data/electronic_computer/Aduc832/di_do_ai_ao.ihx Test hex] | ||
*Configure the ADuC832 so that it is ready for program download | *Configure the ADuC832 so that it is ready for program download | ||
#You need to press and hold both “RESET” and “DOWNLOAD” buttons on the main board. | #You need to press and hold both “RESET” and “DOWNLOAD” buttons on the main board. | ||
| Line 15: | Line 19: | ||
Remark : JAVA -jdk1.6.0_01 ,jre1.6.0_01 ,jre1.6.0_03 | Remark : JAVA -jdk1.6.0_01 ,jre1.6.0_01 ,jre1.6.0_03 | ||
| + | |||
| + | ==Test Procedure== | ||
| + | *Port 0: 0101 0101 | ||
| + | *Port 2: 1010 1010 | ||
| + | *Port 1 = Port 3 | ||
| + | *Short the Jumper of Port 1 | ||
| + | **Port 3 become High | ||
Latest revision as of 21:40, 12 February 2009
Features[edit]
Implementation[edit]
Hardware Setting[edit]
- Programmer
- Test hex
- Configure the ADuC832 so that it is ready for program download
- You need to press and hold both “RESET” and “DOWNLOAD” buttons on the main board.
- First release the “RESET” button and then the “Download” button
- Use the below command to download program
java -jar Aduc832Programmer.jar /dev/ttyS0|COM1 hex_file.hex
Remark : JAVA -jdk1.6.0_01 ,jre1.6.0_01 ,jre1.6.0_03
Test Procedure[edit]
- Port 0: 0101 0101
- Port 2: 1010 1010
- Port 1 = Port 3
- Short the Jumper of Port 1
- Port 3 become High
