Linuxstamp Mboard 1

From OpenCircuits
Revision as of 07:04, 3 April 2014 by DavidCary (talk | contribs) (link to CAN bus)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction[edit]

This project is purely in the planning stages. There are no designs available. It is meant to be a brainstorming area. Feel free to add possible vendors.

Sensor wish list[edit]

Communication wish list[edit]

Power supply[edit]


The correct link may be http://www.powerfromethernet.com/pdf/Ag9000-Sv2-10.pdf

AVR slave[edit]

A dedicated slave processor could be helpful for many things. The main function I have in mind now is PWM outputs for servo control. I think an AVR could even be programmed through the SPI port of the AT91RM9200 (some hacking may be needed to make that work). Even if you can't programm the AVR through the AT91RM9200, it can still be an SPI slave device.

  • PWM output with standard servo headers
  • Counting/Frequency inputs

Links[edit]